Products

The 4B-I 4” Isolator base is designed to snap-fit to the ceiling tile adaptor or itcan screw fix to a ceiling in the traditional manner. The 4B-I 4...

A detector that is ideal for protecting large open areas without sacrificing speed ofresponse to flaming fires. A unique detector ideal for fast re...

The 601RIL Remote Indicator is used where a detector LED is not visible i.e.,when the detector is mounted in a roof void, lift shaft etc. General F...

Functional detector bases use a common moulding which incorporates a double sided circuit board which enables electrical connections to be made on ...

701H rate-of-rise heat detector detects abnormally high rates of rising temperature.The micro-processor inside the detector offers advanced algorit...

The 701P smoke detector operates by sensing the optical scatter from smokeparticles generated in a fire. The micro-processor inside the detector al...

The 701PH optical heat detector operates by sensing the optical scatter fromsmoke particles generated in a fire, and a rapid rate of rising tempera...

The 702H and 703H heat detectors detect abnormally high static temperatures of60°c and 90°c, respectively. They can be used in areas where smoke de...

The 702H and 703H heat detectors detect abnormally high static temperatures of60°c and 90°c, respectively. They can be used in areas where smoke de...

The 801HL Remote Indicator is used where a detector LED is not visible i.e., whenthe detector is mounted in a roof void, lift shaft etc. The 801HL ...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

Fireclass Essential 2 Zone Panel The Fireclass Essential Panel range is an EN-approved, low cost conventional panels that are available in both 2 Z...

Fireclass Essential 4 Zone Panel The Fireclass Essential Panel range is an EN-approved, low cost conventional panels that are available in both 2 Z...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The FC410BDM Beam Detector Interface Module is designed to power andinterface one FIRERAY 50/100/3000/5000 Beam Detector to the FireClass DigitalAd...

The FC410CIM Addressable Contact Input Module is designed to monitorfire contacts such as extinguishing system control, ventilation control, firedo...

The FC410DDM provides the ability to connect and interface 2 conventional zones,to the FireClass fire alarm controller. The FC410DDM monitors the s...

The Addressable FC410DIM provides the ability to connect and Interface one zoneof conventional detectors (non-addressable) to the Fire Alarm Contro...

The FC410LI Line Isolator Module is designed to be used on the FireClassaddressable controller loop. It monitors the line condition and when detect...

The FC410MIM Mini Input module is designed to monitor fire contacts, such asextinguishing system control, ventilation control, fire door control et...

The FC410MIO Multi I/O Module has three inputs and two outputsfrom latching relays. The inputs can monitor fire contacts such as extinguishing syst...

The FC410QIO Quad Input/Output Module is designed to provide four monitoreddigital inputs and four potential free relay changeover outputs.The outp...

The FC410QMO comprises of four monitored relay outputs that are suitable for24Vdc sounders. The outputs are monitored for short and open circuit fa...

The FC410QRM Quad Relay Module is designed to provide four potential free relaychangeover outputs. The outputs are monitored with parallel contacts...

The FC410RIM Relay Interface Module provides one volt-free relay changeovercontact on a latching relay. The relay is controlled by a command sent f...

The FC410SIO Single Input/Output Module is designed to provide a monitoredopen collector input and a volt free relay changeover output. FC410SIO ca...

The FC410SNM Sounder Notification Module is designed to provide an output,in response to a command signaled from a controller, to activate a number...

When activated, either by a fire signal or by a fault or isolation within the fire doorzone, the FC410TSM will interrupt the supply to the door hol...

A comprehensive range of call points for use with FireClass addressable systems, using the robust and reliable FireClass open protocol. All the cal...

A comprehensive range of call points for use with FireClass addressable systems, using the robust and reliable FireClass open protocol. All the cal...

The FC440AVB and FC441AVB are addressable sounder bases with a visual alarmdevice specifically for use with the FireClass addressable detectors. Th...

The FC440AV range of compact addressable wall sounders with a visual alarmdevice (VAD) includes three models with the same low current and high out...

The FC440AV range of compact addressable wall sounders with a visual alarmdevice (VAD) includes three models with the same low current and high out...

The FC440AVB and FC441AVB are addressable sounder bases with a visual alarmdevice specifically for use with the FireClass addressable detectors. Th...