FireClass

The 517.050.023FC 5BEX detector base has been ATEX approved for use with the series M600Ex and series 800Ex intrinsically safe detectors and is cov...

516.600.066FC 601FEx Infra-Red Flame Detector The 601F and 601FEx point type flame detectors form part of the 600 series of conventional detectors....

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

A conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by resettable deformable element. Comes complet...

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

The MEDC DB3BDGD048N2BNR is a high power explosion proof sounder, introduced as a replacement for the current DB3 with improved functionality and p...

The ’DX’ Series enclosures house Pepperl & Fuchs KFDO-CS-Ex1.54 Galvanic Isolator (20 mm pitch) and the MTL5525 I.S. Sounder Driver (16.2 mm pi...

In many cases it will be necessary to site the FC410BDM Beam Detector Modulesome distance from the beam detector itself. To minimize and simplify w...

The HVR800 High Voltage Relay Interface is a non-addressable multi-voltagerelay module (operating from 24V DC, 24V AC, 120V AC and 240V AC).The enc...

Optional terminal kit for FireClass 4B-DHM -Deck Head Mounting Base - 517.050.051

DIN rail mounting bracket enables any module which can be mounted to a FC470CV ancillary cover to be DIN rail mounted using this bracket. Clip-on P...

The Fireclass 4B is a detector base for use with the Fireclass FC460 range of addressable detectors.

FireClass 4B-D Conventional Detector Base - 517.050.045 The Tyco 4B-D is a conventional detector with diode designed for use with the Tyco Fir...

Where the detectors are mounted in humid and environmentally challengingsituations such as marine or offshore installations, the 4B DHM deck head m...

The 4B-I 4” Isolator base is designed to snap-fit to the ceiling tile adaptor or itcan screw fix to a ceiling in the traditional manner. The 4B-I 4...

A detector that is ideal for protecting large open areas without sacrificing speed ofresponse to flaming fires. A unique detector ideal for fast re...

The 601RIL Remote Indicator is used where a detector LED is not visible i.e.,when the detector is mounted in a roof void, lift shaft etc. General F...

Functional detector bases use a common moulding which incorporates a double sided circuit board which enables electrical connections to be made on ...

701H rate-of-rise heat detector detects abnormally high rates of rising temperature.The micro-processor inside the detector offers advanced algorit...

The 701P smoke detector operates by sensing the optical scatter from smokeparticles generated in a fire. The micro-processor inside the detector al...

The 701PH optical heat detector operates by sensing the optical scatter fromsmoke particles generated in a fire, and a rapid rate of rising tempera...

The 702H and 703H heat detectors detect abnormally high static temperatures of60°c and 90°c, respectively. They can be used in areas where smoke de...

The 702H and 703H heat detectors detect abnormally high static temperatures of60°c and 90°c, respectively. They can be used in areas where smoke de...

The 801HL Remote Indicator is used where a detector LED is not visible i.e., whenthe detector is mounted in a roof void, lift shaft etc. The 801HL ...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

Fireclass Essential 2 Zone Panel The Fireclass Essential Panel range is an EN-approved, low cost conventional panels that are available in both 2 Z...

Fireclass Essential 4 Zone Panel The Fireclass Essential Panel range is an EN-approved, low cost conventional panels that are available in both 2 Z...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The FC410BDM Beam Detector Interface Module is designed to power andinterface one FIRERAY 50/100/3000/5000 Beam Detector to the FireClass DigitalAd...

The FC410CIM Addressable Contact Input Module is designed to monitorfire contacts such as extinguishing system control, ventilation control, firedo...

The FC410DDM provides the ability to connect and interface 2 conventional zones,to the FireClass fire alarm controller. The FC410DDM monitors the s...

The Addressable FC410DIM provides the ability to connect and Interface one zoneof conventional detectors (non-addressable) to the Fire Alarm Contro...

The FC410LI Line Isolator Module is designed to be used on the FireClassaddressable controller loop. It monitors the line condition and when detect...

The FC410MIM Mini Input module is designed to monitor fire contacts, such asextinguishing system control, ventilation control, fire door control et...