Fire Detection

The two loop addressable panel from FireClass is a highly featured digitaladdressable fire alarm system with an advanced TFT colour touch-screen us...

The FC604S is a four loop FireClass networkable panel with a shallow housing. Thispanel can have four standard-power loops or two high-power loops ...

The FC602S is a compact two-loop FireClass networkable panel with a shallowhousing. It can have two standard-power loops or one high-power loop wit...

FC470MDGB Metal surface mount MK backbox for use with FC410 Seriesaddressable ancillaries using 517.035.007 cover.

The FC460 range of detectors use the FireClass digital protocol to provide robust and reliable communications to the control panel. A wide range of...

The FC460 range of detectors use the FireClass digital protocol to provide robust and reliable communications to the control panel. A wide range of...

The FC440AV range of compact addressable wall sounders with a visual alarmdevice (VAD) includes three models with the same low current and high out...

The FC440AVB and FC441AVB are addressable sounder bases with a visual alarmdevice specifically for use with the FireClass addressable detectors. Th...

The FC440AV range of compact addressable wall sounders with a visual alarmdevice (VAD) includes three models with the same low current and high out...

The FC440AV range of compact addressable wall sounders with a visual alarmdevice (VAD) includes three models with the same low current and high out...

The FC440AVB and FC441AVB are addressable sounder bases with a visual alarmdevice specifically for use with the FireClass addressable detectors. Th...

When activated, either by a fire signal or by a fault or isolation within the fire doorzone, the FC410TSM will interrupt the supply to the door hol...

The FC410SNM Sounder Notification Module is designed to provide an output,in response to a command signaled from a controller, to activate a number...

The FC410SIO Single Input/Output Module is designed to provide a monitoredopen collector input and a volt free relay changeover output. FC410SIO ca...

The FC410RIM Relay Interface Module provides one volt-free relay changeovercontact on a latching relay. The relay is controlled by a command sent f...

The FC410QRM Quad Relay Module is designed to provide four potential free relaychangeover outputs. The outputs are monitored with parallel contacts...

The Addressable FC410DIM provides the ability to connect and Interface one zoneof conventional detectors (non-addressable) to the Fire Alarm Contro...

The FC410BDM Beam Detector Interface Module is designed to power andinterface one FIRERAY 50/100/3000/5000 Beam Detector to the FireClass DigitalAd...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The FC600 range of repeaters include both AC and DC powered models, featuring acolour LCD display with 32 LED zonal display. Both repeaters are als...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...

The 801HL Remote Indicator is used where a detector LED is not visible i.e., whenthe detector is mounted in a roof void, lift shaft etc. The 801HL ...

The 601RIL Remote Indicator is used where a detector LED is not visible i.e.,when the detector is mounted in a roof void, lift shaft etc. General F...

The 4B-I 4” Isolator base is designed to snap-fit to the ceiling tile adaptor or itcan screw fix to a ceiling in the traditional manner. The 4B-I 4...

Where the detectors are mounted in humid and environmentally challengingsituations such as marine or offshore installations, the 4B DHM deck head m...

Optional terminal kit for FireClass 4B-DHM -Deck Head Mounting Base - 517.050.051

The HVR800 High Voltage Relay Interface is a non-addressable multi-voltagerelay module (operating from 24V DC, 24V AC, 120V AC and 240V AC).The enc...

DIN rail mounting bracket enables any module which can be mounted to a FC470CV ancillary cover to be DIN rail mounted using this bracket. Clip-on P...

In many cases it will be necessary to site the FC410BDM Beam Detector Modulesome distance from the beam detector itself. To minimize and simplify w...

The Fireclass 4B is a detector base for use with the Fireclass FC460 range of addressable detectors.

A comprehensive range of call points for use with FireClass addressable systems, using the robust and reliable FireClass open protocol. All the cal...

The FC460 range of detectors use the FireClass digital protocol to provide robust and reliable communications to the control panel. A wide range of...

The FC460 range of detectors use the FireClass digital protocol to provide robust and reliable communications to the control panel. A wide range of...