Products

The CS-PYH is an addressable combined optical smoke and heat detector suitable for use in SIL 1 and SIL 2 applications. It is designed to comply wi...

Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give early warning for the presence of heat in the supervised ar...

Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give early warning for the presence of heat in the supervised ar...

Consilium Salwico- MCP-SPR-A (GB) - External Sprinkler Release Callpoint -  5200037-01 The MCP-SPR-A is a push button for outdoor environment and d...

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

A conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by resettable deformable element. Comes complet...

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

DAB3-4 Mounting flange – Type B for Conduit (supplied in packs of 10)

The MEDC DB3BDGD048N2BNR is a high power explosion proof sounder, introduced as a replacement for the current DB3 with improved functionality and p...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from a...

The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from a...

For: Next Generation 40/40 series The Duct Mount allows flame detection in areas where high temperatures exist or in cases where the detector canno...

The ’DX’ Series enclosures can house Pepperl & Fuchs KFDO-CS-Ex1.54 Galvanic Isolator and the MTL5525 I.S. Sounder Driver. The units are DIN ra...

The ’DX’ Series enclosures house Pepperl & Fuchs KFDO-CS-Ex1.54 Galvanic Isolator (20 mm pitch) and the MTL5525 I.S. Sounder Driver (16.2 mm pi...

The printer is designed as a low cost business printer ideally suited for mounting adjacent to the fire control panel. The LQ-350 combines high per...

In many cases it will be necessary to site the FC410BDM Beam Detector Modulesome distance from the beam detector itself. To minimize and simplify w...

The HVR800 High Voltage Relay Interface is a non-addressable multi-voltagerelay module (operating from 24V DC, 24V AC, 120V AC and 240V AC).The enc...

Optional terminal kit for FireClass 4B-DHM -Deck Head Mounting Base - 517.050.051

DIN rail mounting bracket enables any module which can be mounted to a FC470CV ancillary cover to be DIN rail mounted using this bracket. Clip-on P...

The Fireclass 4B is a detector base for use with the Fireclass FC460 range of addressable detectors.

FireClass 4B-D Conventional Detector Base - 517.050.045 The Tyco 4B-D is a conventional detector with diode designed for use with the Tyco Fir...

Where the detectors are mounted in humid and environmentally challengingsituations such as marine or offshore installations, the 4B DHM deck head m...

The 4B-I 4” Isolator base is designed to snap-fit to the ceiling tile adaptor or itcan screw fix to a ceiling in the traditional manner. The 4B-I 4...

A detector that is ideal for protecting large open areas without sacrificing speed ofresponse to flaming fires. A unique detector ideal for fast re...

The 601RIL Remote Indicator is used where a detector LED is not visible i.e.,when the detector is mounted in a roof void, lift shaft etc. General F...

Functional detector bases use a common moulding which incorporates a double sided circuit board which enables electrical connections to be made on ...

701H rate-of-rise heat detector detects abnormally high rates of rising temperature.The micro-processor inside the detector offers advanced algorit...

The 701P smoke detector operates by sensing the optical scatter from smokeparticles generated in a fire. The micro-processor inside the detector al...

The 701PH optical heat detector operates by sensing the optical scatter fromsmoke particles generated in a fire, and a rapid rate of rising tempera...

The 702H and 703H heat detectors detect abnormally high static temperatures of60°c and 90°c, respectively. They can be used in areas where smoke de...

The 801HL Remote Indicator is used where a detector LED is not visible i.e., whenthe detector is mounted in a roof void, lift shaft etc. The 801HL ...

The BXM24/25-U and 50-U are approved by IMQ to EN 54-4:1997 + A1:2002 andEN60950-1:2001. The steel housing contains a 2.5 amp or 5 amp switch modep...