Products

The 517.050.023FC 5BEX detector base has been ATEX approved for use with the series M600Ex and series 800Ex intrinsically safe detectors and is cov...

516.600.066FC 601FEx Infra-Red Flame Detector The 601F and 601FEx point type flame detectors form part of the 600 series of conventional detectors....

The 711H is an A1R heat detector that uses both rate-of-rise and 60°C static temperature sensing, where the fixed element provides a backstop for f...

The 711P operates by sensing the optical scatter from smoke particles generated in a fire These intelligent, conventional detectors come with built...

The 701PH smoke and heat detector operates as a standard optical detector under normal ambient conditions. However, when a rapid rise in temperatur...

The 712H is an A1S heat detector with a static response temperature of 60°C (EN54-5). Since it only responds at these specific temperatures. The bu...

The 713H heat detector has a static response temperature of 90°C (EN54-5), which works best in areas where higher temperatures are normal such as e...

Tyco 811F MX Flame Detector (Marine) The 811F and 811FEx point type flame detectors are part of the MXTechnology range of digital addressable fire ...

Tyco 850H Heat Detector Minerva MX The 850H heat sensor can operate in fixed temperature and rate-of-rise modes with a number of approved sensitivi...

Tyco 850PC Smoke, Heat & Carbon Monoxide Multi-Sensor Detector Minerva MX (516.850.054) For life protection and when the environmental conditio...

Tyco 851PH Marine Smoke Heat Detector Minerva MX (516.850.055) With the ability to detect a wide range of fires from flaming to smouldering types, ...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

The AC-IR-3Fq is a triple frequency infrared flame detector produced using the latest inmanufacturing technology. It is supplied with an array of a...

Salwico Cargo (AI) is an addressable analogue fire alarm system and general alarm system. The control panel is built-in in the main cabinet. It is ...

The CS-PYH is an addressable combined optical smoke and heat detector suitable for use in SIL 1 and SIL 2 applications. It is designed to comply wi...

Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give early warning for the presence of heat in the supervised ar...

Salwico EV-H is an analogue addressable heat detector. Salwico EV-H is designed to give early warning for the presence of heat in the supervised ar...

Consilium Salwico - EV-PH OPTICAL SMOKE/HEAT DET - 040030 Salwico EV-PH is an analogue addressable combined optical smoke and heat detector.Salwico...

Consilium Salwico - External Manual Callpoint - MCP-A WP SCI - 5200031-02   MCP-A WP SCI is an addressable manual call point, designed for Salwico ...

Consilium Salwico- MCP-SPR-A (GB) - External Sprinkler Release Callpoint -  5200037-01 The MCP-SPR-A is a push button for outdoor environment and d...

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

A conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by resettable deformable element. Comes complet...

Conventional manual alarm call point with integral alarm LED and activationresistor. Operation is by break glass. This call point is semi flush mou...

The MEDC DB3BDGD048N2BNR is a high power explosion proof sounder, introduced as a replacement for the current DB3 with improved functionality and p...

The ’DX’ Series enclosures can house Pepperl & Fuchs KFDO-CS-Ex1.54 Galvanic Isolator and the MTL5525 I.S. Sounder Driver. The units are DIN ra...

The ’DX’ Series enclosures house Pepperl & Fuchs KFDO-CS-Ex1.54 Galvanic Isolator (20 mm pitch) and the MTL5525 I.S. Sounder Driver (16.2 mm pi...

In many cases it will be necessary to site the FC410BDM Beam Detector Modulesome distance from the beam detector itself. To minimize and simplify w...

The HVR800 High Voltage Relay Interface is a non-addressable multi-voltagerelay module (operating from 24V DC, 24V AC, 120V AC and 240V AC).The enc...

Optional terminal kit for FireClass 4B-DHM -Deck Head Mounting Base - 517.050.051

DIN rail mounting bracket enables any module which can be mounted to a FC470CV ancillary cover to be DIN rail mounted using this bracket. Clip-on P...

The Fireclass 4B is a detector base for use with the Fireclass FC460 range of addressable detectors.

FireClass 4B-D Conventional Detector Base - 517.050.045 The Tyco 4B-D is a conventional detector with diode designed for use with the Tyco Fir...

Where the detectors are mounted in humid and environmentally challengingsituations such as marine or offshore installations, the 4B DHM deck head m...