Products

The 20/20MI is an economical and compact Triple IR (IR3) Flame Detector with the highest immunity to false alarms, in a rugged stainless steel hous...

The low cost, compact, lightweight 20/20ML UV/IR Flame Detector comprises both UV and IR sensors, detecting hydrocarbon-based fuel and gas fires, h...

The 20/20MPI is a low cost, high performance, compact Triple IR (IR3) Flame Detector in a lightweight polycarbonate housing. It retains all the ben...

38AH Addressable Expansion PSU - matches P115D housing

4510S Isolated RS485 Repeater

The 517.050.023FC 5BEX detector base has been ATEX approved for use with the series M600Ex and series 800Ex intrinsically safe detectors and is cov...

516.600.066FC 601FEx Infra-Red Flame Detector The 601F and 601FEx point type flame detectors form part of the 600 series of conventional detectors....

The 711H is an A1R heat detector that uses both rate-of-rise and 60°C static temperature sensing, where the fixed element provides a backstop for f...

The 711P operates by sensing the optical scatter from smoke particles generated in a fire These intelligent, conventional detectors come with built...

The 701PH smoke and heat detector operates as a standard optical detector under normal ambient conditions. However, when a rapid rise in temperatur...

The 712H is an A1S heat detector with a static response temperature of 60°C (EN54-5). Since it only responds at these specific temperatures. The bu...

The 713H heat detector has a static response temperature of 90°C (EN54-5), which works best in areas where higher temperatures are normal such as e...

The 800F is a digital addressable, low cost infrared flame detector with some high end features such as ‘Solar Blind’ operation for false alarm fre...

The 80DSB is a detector base specifically for use with the ZETTLER addressable detectors. The base incorporates a fire alarm sounder that is activa...

Tyco 811F MX Flame Detector (Marine) The 811F and 811FEx point type flame detectors are part of the MXTechnology range of digital addressable fire ...

The engineering management tool communicates with the 850 series and 830 series devices using a 2 way infrared wireless link. Commissioning data is...

Tyco 850H Heat Detector Minerva MX The 850H heat sensor can operate in fixed temperature and rate-of-rise modes with a number of approved sensitivi...

Tyco 850PC Smoke, Heat & Carbon Monoxide Multi-Sensor Detector Minerva MX (516.850.054) For life protection and when the environmental conditio...

Tyco 851PH Marine Smoke Heat Detector Minerva MX (516.850.055) With the ability to detect a wide range of fires from flaming to smouldering types, ...

8621C Steel flush mount MK backbox for use with 800 Series addressable ancillaries using M520 Ancillary Cover (517.035.007). Ancillary Housing Tech...

Accessory Kit for 850EMT Engineering Management Tool Contains: Carry case Shoulder strap Car 12v adaptor

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

An environmentally friendly, socially responsible, automatic fire suppression system that uses aerosol technology to rapidly suppress fire. Patente...

For: 20/20 series The special Air Shield, developed for SharpEye optical flame detectors, allows their installation under tough environmental condi...

For: Next Generation 40/40 series The Air Shield enables the connection of a compressed air line to provide an 'air curtain' that helps avoid accum...

The VESDA Sampling Hole Clip delivers reliable and accurate sampling hole sizes that are fast to install and easy to locate and identify. Each clip...

The Automatic Purging Unit (F-BO-AFE70) provides a user-friendly AFE70-2 and AFE70-3 units and compact solution with selectable preventative or eve...

The BDM800 is designed to interface the FIRERAY reflective beam detectors to the MZX Digital Addressable Loop. The BDM800 provides power from the l...

If it is necessary to site the BDM800 Beam Detector Module some distance from the beam detector itself, an optional BTM800 beam termination module ...

The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to curren...

The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to curren...

For: Next Generation 40/40 series The Cone Viewer is a convenient tool for coverage approximation during the installation process.

The AC-IR-3Fq is a triple frequency infrared flame detector produced using the latest inmanufacturing technology. It is supplied with an array of a...

Salwico Cargo (AI) is an addressable analogue fire alarm system and general alarm system. The control panel is built-in in the main cabinet. It is ...