Zettler

38AH Addressable Expansion PSU - matches P115D housing

4510S Isolated RS485 Repeater

The 800F is a digital addressable, low cost infrared flame detector with some high end features such as ‘Solar Blind’ operation for false alarm fre...

The 80DSB is a detector base specifically for use with the ZETTLER addressable detectors. The base incorporates a fire alarm sounder that is activa...

The engineering management tool communicates with the 850 series and 830 series devices using a 2 way infrared wireless link. Commissioning data is...

8621C Steel flush mount MK backbox for use with 800 Series addressable ancillaries using M520 Ancillary Cover (517.035.007). Ancillary Housing Tech...

Accessory Kit for 850EMT Engineering Management Tool Contains: Carry case Shoulder strap Car 12v adaptor

The BDM800 is designed to interface the FIRERAY reflective beam detectors to the MZX Digital Addressable Loop. The BDM800 provides power from the l...

If it is necessary to site the BDM800 Beam Detector Module some distance from the beam detector itself, an optional BTM800 beam termination module ...

The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to curren...

The CIM800 is a flexible addressable input-monitoring device that fits in the standard ancillary housings. The CIM800 provides two inputs to curren...

DAB3-4 Mounting flange – Type B for Conduit (supplied in packs of 10)

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DDM800 provides the ability to connect and interface 2 zones of conventional 2 wire fire detectors or two 4-20mA sensors to the MZX Fire alarm ...

The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from a...

The DIM800 is designed to power and monitor a circuit of low voltage conventional detectors and callpoints. The detection circuit is powered from a...

The printer is designed as a low cost business printer ideally suited for mounting adjacent to the fire control panel. The LQ-350 combines high per...

Flush Bezel for P1 & P4 Panels

The RIM800 provides a single programmable relay output from the MZX DIGITAL addressable loop which can be programmed for a variety of applications ...

The RIM800 provides a single programmable relay output from the MZX DIGITAL addressable loop which can be programmed for a variety of applications ...

The LIM800 Ancillary Line Isolator Module is designed to be used on all MZX addressable loops. It monitors the line condition and upon detection of...

The LIM800 Ancillary Line Isolator Module is designed to be used on all MZX addressable loops. It monitors the line condition and upon detection of...

LPBS865 Open class SymphoniAddressable Beacon Sounder IP65 RedBody White Flash for Outdoor Use. Models Available The Sounder only models are availa...

LPSY865 Symphoni IP65 Addressable Sounder IP65 Red Body for Outdoor Use. Models Available The Sounder only models are available with a red or white...

The printer is designed as a low cost business printer ideally suited for mounting adjacent to the fire control panel. The LQ-350 combines high per...

The MCP820 is an indoor addressable manual callpoint for Fire Panels with MZX technology. It incorporates an integrated line isolator as standard. ...

The MCP830 is an outdoor addressable manual callpoint for Fire Panels with MZX technology which incorporates an integrated line isolator as standar...

The MIM800 is a small MZX addressable module designed for monitoring a single input circuit. The MIM800 can monitor normally open or normally close...

The MIO800 is a general purpose interface module. It allows multiple input and output connections to be made between external equipment and the MZX...

The BACnet interface (UC-8112-ME-T-LX) replaces the old MZX BACnet interface (UC-8112-LX). It is backward compatible and can be used with the curre...

MXRemote is a Windows based software tool for remote service and support of MZX detection panels. MXRemote provides a full function fire panel repe...

The MZX compatible ELM24TSM 4 Amp 24VDC Addressable Door Control & Power Supply Unit, is designed to provide monitoring and activation in compl...

MZX Service tool, Spare Pins for Programming Lead (pk of 10)

The MZX-e extinguishing control panel is powerful yet user-friendly and is designed and manufactured to a high standard. The panel features approva...